How to Sew the Top of a Dilly Bag
We get a lot of questions about how to sew the top of our popular dilly bag designs, so, using our Sweet Sunday Dilly Bag as an example, we’ve broken down the steps below:
1. Prepare all of the fabric pieces you need to complete the bag — front piece, back piece, and two lining pieces. Lining pieces should be exactly the same size as the front and back pieces.

2. Take a casing piece and sew the two ends together with a 1/4” seam allowance. Repeat with the other piece.
3. Open the seams on both casing pieces out flat and iron so the pieces resemble an open book.

4. Invert the fabric so the right side is facing out and iron the seam flat again.

5. Next, fold the casing pieces in half lengthwise so that the two raw edges meet at the top. Iron the pieces.

6. Now, pin the casing to the front piece of the purse, right side facing up. Match the raw edges of the casing piece with the raw edges of the front piece. Centre the casing piece, leaving approximately half an inch gap on either side.

7. Repeat Step 6 with the back piece, leaving approximately half an inch on either side.

8. Pin the lining piece to the front and back pieces. Right sides of the front and lining pieces should be facing each other. The back side of the lining fabric should be facing up/towards you. Raw edges of the front piece and lining piece should meet at the top.

9. Sew the lining piece to the front piece using a 1/4” seam along the raw edges.
10. Repeat Step 9 with the back piece.

11. It should now look like this:

12. Place the back and front pieces together with both the right sides facing out, pin, and sew around the outside of the pieces using a 1/4” seam allowance. Leave a small 3” gap to turn your lining right way up on the inside of the bag

13. To box out the lining corners: place the bag flat so that the two bottom corners are on right angles. Measure 1/2” to 3/4” from the corner and mark with a pencil. Repeat with the other corner.

14. Stitch both lining corners with a straight stitch across the marked spot. Reverse at the end so the stitching is secure.
15. Turn the bag inside out through the gap left in the lining.
16. Sew the bottom of the lining closed by hand or using a sewing machine.
17. Iron the bag.

18. Thread one ribbon through the casing on one side of the bag, then through the casing on the other side. Attaching the ribbon to a safety pin can make this easier.

19. Repeat with the other piece of ribbon, starting from the opposite side and threading through both sides of the casing.

20. Knot the pieces on one side together. Repeat with the other side.

Done!
It looks like heaps of steps but I promise once you get the hang of it, completing a dilly bag is not as impossible as it seems.
The finished product will be a beautiful and functional bag perfect for storing lots of knick-knacks.
Our Dilly Bag range




Leave a comment